Privacy

CoreBeat Privacy Policy

CoreBeat collects no personal information. Here is what data it touches, where it’s kept, and how to delete it.

Last updated: November 20, 2026← CoreBeat

What the app reads

This information is only used to show it in the app, and never leaves your device.

  • CPU and memory usage, the network interfaces’ traffic counters, the system thermal state, battery level and charging state, and storage space.
  • The device’s network configuration: IP addresses, subnet mask, gateway, DNS servers, whether a VPN is connected, system proxy settings, and the network type of each cellular line.
  • The device model and OS version, and how much storage the app itself takes up.
  • The Mac app also reads the disk’s read and write speeds, space, model, file system and total reads and writes since startup, plus this Mac’s hardware details: memory, flash and battery cell makers, design capacity, charger, Wi‑Fi and Bluetooth chips, display, Thunderbolt, model number and Activation Lock state. These are only shown on that Mac too.
  • The Mac app also reads GPU usage. When available, it reads system power draw, battery charging and discharging power, and the names and battery levels of compatible Bluetooth accessories. Accessory information is used for display and local low-battery alerts.
  • The widgets, the Apple Watch app and the Mac app each read only their own device, and nothing is sent between them. The one exception is the app and its own widgets on the same iPhone, which share a piece of on-device storage for the monthly cellular tally.
  • The Mac direct-download build also reads temperature sensors, fan speeds, the SSD’s health data (remaining life, total data written, power-on hours and so on), and the names and CPU and memory use of running processes and threads. Again, these are only shown on that Mac and never stored.

Looking up your public IP

  • Only an outside service can tell you your public IP, so the app contacts ipify.org (api.ipify.org and api6.ipify.org) only when you tap “Look up public IP”.
  • As with any request, ipify sees the IP address it comes from, and its own privacy policy applies. The app doesn’t keep the result.

Speed test

  • It only starts when you tap. To measure speed, the app downloads and then uploads randomly generated data to and from Cloudflare’s speed test server (speed.cloudflare.com), containing nothing about you; Cloudflare’s privacy policy applies, and it sees the IP address the request comes from.
  • To measure latency, the app just opens one connection each to Baidu, WeChat, Douyin, Apple, GitHub, Google and the test server and times it, sending nothing.
  • Up to 100 recent results stay on the device, including the time, download and upload speeds, latency to the test server, network type and bytes transferred. You can delete individual results or clear the history.

Performance stability and network quality map

  • The stability test runs on the device. Up to 30 saved records can include the model, OS version, test conditions, notes, throughput and thermal samples. You can delete the records.
  • The network quality map connects to Cloudflare (speed.cloudflare.com) over unmetered Wi‑Fi when you start a measurement. It makes one warm-up request and six timed HTTPS requests, then downloads 4 MB of test data. Cloudflare receives the IP address used for the connection.
  • You enter room labels yourself. The tool does not request location or store IP addresses or Wi‑Fi names. It keeps up to 20 rooms with five results each on the device. Deleting a room also deletes its results. Room labels, notes and saved readings are not sent to Cloudflare.

Network stability tests

  • When you start a test, it sends small HTTPS requests to speed.cloudflare.com without downloading the response body. Cloudflare receives the IP address used for the test. Cellular and metered connections require you to opt in.
  • The app keeps up to 20 results on your device, including response times, failed requests and changes in connection type. You can delete results. The app does not store your IP address or Wi-Fi name in these records.

Network diagnosis

  • It only starts when you tap “Network diagnosis” (the Control Center button and shortcut just open that screen and start it).
  • It looks up the domains of nine sites — Baidu, WeChat, Taobao, Douyin, Apple, iCloud, Google, GitHub and YouTube — plus a randomly generated domain that doesn’t exist, to tell whether DNS is being hijacked; then it opens a few connections to each of the nine sites and times them. With a VPN or proxy on, it sends three HTTPS requests that only fetch the headers to each instead. Nothing about you is sent, and each site sees the IP address the request comes from.
  • It visits Apple’s captive.apple.com to see whether the network wants a login page.
  • It opens a few connections to your router (the gateway) on the local network to time the hop from the phone, which needs Local Network permission. It doesn’t visit or scan any other device on the network.
  • Results are only shown on screen and never saved.

Hardware check (iPhone / iPad)

The hardware check uses these permissions. The system asks for each only when you start that test, and saying no doesn’t affect anything else.

  • Camera: checks the front and rear cameras and flash; the picture isn’t saved or uploaded.
  • Microphone: records a few seconds for playback. The temporary recording stays on the device and is cleaned up after the check.
  • Location: gets one fix and only looks at its accuracy to judge the GPS; where you are isn’t recorded or shown. (The same location permission is used for the Wi‑Fi name below.)
  • Face ID / Touch ID: runs once to see whether it works; the app never gets any face or fingerprint data.
  • Motion & Fitness: reads the barometer to check the sensor.
  • The report image is only made when you tap share, and shows the device model, OS version, date and each result.
  • Up to 50 device check records stay on your device. You can delete them or choose to export a PDF. Imported battery readings are attached only if you select them. Records do not contain photos, recordings, locations or sensor notes.

Wi‑Fi name

  • iOS only lets an app read the Wi‑Fi name with precise location permission. CoreBeat asks only when you tap the Wi‑Fi name on the Network screen; the name can appear on the Network screen and in diagnosis results. If permission is already granted and the system provides the name, a speed test saves it with the result on the device. The speed test does not ask for location permission, record your location or upload it.
  • Without location permission everything else still works; you just won’t see the Wi‑Fi name.

Monthly cellular data

  • CoreBeat tallies data from the network interfaces’ counters: this month’s cellular use, the billing day and plan size you set, and any calibration stay on this iPhone, shared only by the app and its own widgets, and are never uploaded.
  • To miss less, the app uses the occasional background refresh time the system grants to add to the tally; this doesn’t go online.
  • At 80% and 100% of your plan it sends a local notification, if you allow notifications; it’s decided and sent on the phone, with no server involved.

Shortcuts and Siri

  • The Battery level, Free storage and Thermal state shortcuts read the current value once when you run them and hand it to your shortcut or Siri; the app doesn’t keep it. How Siri handles your voice is covered by Apple’s privacy policy.

Battery health import

  • An analytics log you share, pick or paste is read on the device. The system may hand the app a copy when you share it. CoreBeat does not upload the log.
  • The app keeps only a few numbers from it (cycle count, maximum capacity, full-charge capacity, average and peak temperature, total operating time and the time of the record) in its own storage, to draw the history chart.
  • Swipe left in Battery Health to delete a record. The Mac App Store build reads iPhone analytics logs through the system file picker. The parsed report stays in memory until you clear it or quit.
  • Note: the system only writes that log with “Share iPhone Analytics” turned on, which sends anonymous diagnostics to Apple under Apple’s privacy policy. You can turn it off again after importing.

Check-up share image

  • The image is only made when you tap share. It shows the device model, OS version and scores, and no addresses. Who you send it to is up to you.

iPhone check (Mac direct-download build)

  • It only reads an iPhone connected to the Mac by cable that already trusts this Mac; Wi‑Fi connections don’t count. The App Store build doesn’t have this feature.
  • It’s read-only and changes nothing on the iPhone. It reads the battery, flash storage, model and model number, activation state, supervision and MDM state, number of profiles, camera modules, panic and crash counts, the chip, board, baseband, SIM type and system language.
  • It doesn’t show the serial number, IMEI or phone number; crashes are counted from log file names only, without reading the logs or showing app names.
  • What it reads is only shown on that Mac, and never saved or uploaded. The report image is only made when you tap share, and where it goes is up to you.

Alerts on the Mac

  • Compatible Bluetooth accessories can trigger a local alert when their battery is low. The setting stays on that Mac.
  • When the CPU stays busy, memory gets tight, storage is nearly full or the system throttles to cool down (plus high CPU temperature in the direct-download build), the Mac app shows a local system notification. You allow notifications in macOS and can turn alerts off in Settings at any time.
  • Alerts are decided and shown on your Mac, without any server involved.

Charging Live Activity

  • When you open CoreBeat while charging an iPhone, it can use the local battery level and charging rate to show a Live Activity on the Lock Screen or Dynamic Island. The switch on the charge and drain speed screen is stored on the device. The activity needs no network connection or push server.

Settings kept on the device

  • The “hide addresses” switch on the Network screen is remembered on the device.
  • Imported battery health records, the monthly data settings and tally, and the reading you pick for the single-reading widget are also kept only on the device.
  • The Mac app’s alert switches and thresholds, which items the menu bar shows, and whether it launches at login, are also kept on that Mac.
  • Mac history: one averaged reading a minute (CPU, memory, temperature, battery, network speed, disk activity and system power draw where available, plus the app that used the most CPU that minute in the direct-download build), kept in the app’s own folder, deleted after 7 days and never uploaded.

What the app never does

  • It doesn’t collect, sell or share any personal information, and doesn’t track you across apps.
  • It doesn’t record your location, and doesn’t read your contacts, photos, phone number or device identifiers.
  • There’s no account system, no ads and no third-party analytics.

Children

  • The app collects no personal information from anyone, including children under 13.

Changes to this policy

  • When the app changes, this policy is updated with it, and the date at the top changes. If the app ever needs to collect something new, it will be written here first and explained in the app.

Contact

If you have any questions about this policy, emaillil.cc0616@gmail.com.